OKEN TYPE
POROSITY FILM TESTER

OKEN TYPE POROSITY FILM TESTER 0518-P

OKEN TYPE POROSITY FILM TESTER 0518-P is ideal
for measuring the air permeability of separator films,
which are indispensable for quality control
of lithium-ion battery (LIB) separator films.

DIGITAL OKEN TYPE POROSITY FILM TESTER 0518-P (KUMAGAI RIKI KOGYO Co., Ltd. JAPAN) is ideal for measuring air
permeability of separator film, which is indispensable for quality control of lithium ion battery (LIB) separator film.
The OKEN TYPE POROSITY FILM TESTER measures air permeability by flowing air through the test specimen and
converting the flowing air flow rate into pressure.

DIGITAL OKEN TYPE POROSITY FILM TESTER 0518-P Characteristic

Compared to the Gurley type prosity tester, the OKEN TYPE POROSITY FILM TESTER is characterized by significantly
shorter measurement time (less than 1/10 of the Gurley type) and high repeated measurement accuracy.
The digital type employs an electronic manometer instead of the water column type air manometer,
converts the measured value to digital, is easy to read and is very suitable for site management.

Significantly reduce measurement time (less than 1/10 of the Gurley type. Separator film with porosity of 500 seconds or less can be measured in about 10 seconds)
High repeatability and good stability
Measurement results are digitally displayed and easy to read
Easy operation with touch panel, one-touch measurement
Easy data storage with built-in printer and RS232-C support
Desktop compact body, saving installation space
Correction value setting function for easy data alignment
Japanese, English, Chinese trilingual display

Appearance etc

0518-P body

Japanese, English, Chinese display

Easy touch panel operation & digital display

Built-in printer

Easy data alignment with the correction value setting function

Desktop compact body

0518-P Spec

Display operation section		4 inch color STN touch panel
Electronic manometer capacity		1000mmH2O
Reference air pressure		500mmH2O
Porosity measurement unit	Measurement area	642.4mm2
	Measuring load	about12kg (Back side pressure gauge set pressure 0.1MPa) Air cylinder pressurization method
	Orifice	1 built-in
	Median	100
	Measurement time	1 to 999 seconds
	Range of measurement	5 to 3,000 seconds
Data output	Printer	Thermal printer 58mm width
Data output	External output	RS232-C
Reference standard		ISO 5636-6
Power supply used		AC100-220V 50/60Hz 1A Single-phase
Air source		0.4Mpa
External dimensions		W260 x D430 x H420mm
Machine weight		About 24kg

Inquiry form

OKEN TYPE POROSITY FILM TESTER